Badger Meter Fluid Management System - Manual (Page 21)

Installation & Operation Manual
REPORTS
When everything is complete in the Configuration Menu, the supervisor should print the settings from the keypad and put
them in a safe place
You can print reports:
•
From an external printer via the Report menu
• From the internal printer via the 190 menu
190 Menu (Internal Printer)
The 190 menu screens allow you to print these reports from the internal keypad printer:
•
Initialization (INI)
• Configuration (CNF)
• Communication (COM)
• Work Order (WO)
Select
190 RAD ... ...
1 Use the Scroll key to move the cursor to the 190 selection
2 Press Enter to display the Select Report screen
Select report
INI CNF COM WO
3 Use the Scroll key to move the cursor to the report you want to
print
4 Press Enter to print the report
5 Tear off the ticket from the keypad
6 Press Home to go back to the default screens
Report (REP) Menu (External Printer)
The supervisor has the opportunity to print out a variety of reports to the External Printer
•
INI prints all parameters associated with the system initialization
• CNF prints all parameters selected for a keypad configuration
• MET prints the status of all hoses/meters
• WO prints the dispense order history
To print reports the External Printer option must be set to YES (see "CONFIGURATION (CNF) MENU" on page 15 )
Select
INI CNF MET REP
1 Use the Scroll key to move the cursor to REP
2 Press Enter to advance to the Select Report screen
3 Use the Scroll key to select a report
4 Press Enter to print the report
Initialization Report
Select report
INI CNF COM WO
1 From the Select Report screen, use the Scroll key to move the cursor
to INI
2 Press Enter to print the report
Page 21 August 2012