Badger Meter Fluid Management System - Manual (Page 15)

Installation & Operation Manual
CONFIGURATION (CNF) MENU
The Configuration (CNF) Menu allows a supervisor to set up all parameters for the keypad operation A supervisor is the only
user with access to these screens When everything is complete in the Configuration Menu, the supervisor should print the
settings from the keypad and put them in a safe place Refer to "Report (REP) Menu (External Printer)" on page 21 or "190
Menu (Internal Printer)" on page 21 for information on printing reports
Select
INI CNF MET REP
1 Press the Scroll key until CNF is highlighted
2 Press Enter
Confirm Reset
YES / NO
System Reset
YES / NO
Mileage Info
YES / NO
Mileage type
KM / MILES
Topoff Timer
300
Regist. Info
YES / NO
Keypad Timeout
10
CONFIGURATION
MENU
Clear Transacts
YES / NO
Confirm clear
YES / NO
Internal printer
YES / NO
External Printer
YES / NO
Barcode Scanner
YES / NO
Scanner Lock
PFF PIN ALL
Display Timeout
100
YES
YES
New Superv. PW
****
Super Confirm
****
BUZZER
YES / NO
WO Validation
YES / NO
Display Fluid
YES / NO
Figure 3: Configuration Menu Flowchart
Page 15 August 2012