Martel Electronics LC-110/H - Manual (Page 48)

46
8. Specifications
Functions: mA source, mA simulate, mA read, mA read/
loop power, and volts read.
Ranges: mA (0 to 24mA) and Volts (0 to 30VDC)
Resolution: 1uA on mA ranges and 1mV on voltage range
Accuracy: 0.01% of reading ± 2LSD all ranges
(@23° ± 5°C)
Operating Temp Range: -10°C to 55°C (14°F to 131°F)
Humidity Range:
10 to 95% non-condensing
Storage: -20°C to 60°C (-4°F to 140°F)
Stability: 20ppm of F.S. /°C from -10°C to 18°C and 28°C
to 55°C
Display: 128 x 64 pixels, LCD Graphic w/backlight,
.34” high digits
Power: 6AAA alkaline, lithium, or NiMH batteries
Battery Life: ≥ 40 hours continuous use (measure mode)
Loop Compliance
Voltage:
24VDC @ 20mA
Loop Drive Capability: 1200 Ω without HART resistor, 950 Ω with HART
resistor
IP Rating: IEC 60529: IP40
Over-Voltage Protection: 240VAC
Overload Current
Protection:
28mA DC
EMC: EN61326 Annex A (Portable Instruments)
Dimensions (LxWxD): 6” x 3.6” x 1.3” (15 cm x 9 cm x 3 cm)
Weight: 9.5 ounces (0.3 kg)
Included Accessories: NIST traceable calibration certificate with data,
batteries, test leads, and manual
9. Warranty
Martel Electronics Corporation warrants all products against material
defects and workmanship for a period of twelve (12) months after the
date of shipment. Problems or defects that arise from misuse or
abuse of the instrument are not covered. If any product is to be
returned, a “Return Material Authorization” form can be obtained from
our website www.martelcorp.com under customer service. You can