Martel Electronics LC-110/H - Manual (Page 39)

37
Rotate the knob to move the reverse video highlight to the desired
operation. Press the knob to perform the operation. Press MENU/
EXIT to return to the Log Select menu in section 6.10.
START operation:
• If no free records remain, no free sessions remain, or the
present HART device does not match the HART device already
logged, an error message is displayed.
• Otherwise, proceed to interval selection described below.
ERASE operation:
• If there is no logged data, an error message is displayed.
• Otherwise, confirm that the existing data is to be permanently
erased before doing so.
Select the logging interval.
Select Interval ♥
1 second
2 seconds
5 seconds
10 seconds
30 seconds
60 seconds
The ♥ symbol in the upper right corner flashes to indicate a working
HART connection.
Rotate the knob to move the reverse video highlight to the desired
interval. Press the knob to start logging at that interval. Press
MENU/EXIT to return to the first data log screen.
While logging the following is displayed to monitor progress and to
allow logging to be stopped.
Logging ♥
Interval: 30 seconds
Elapsed: 2:15:25
Records used: 270
Records free: 9430
LC110H 6.288 mA
PV mA: 6.317 mA
The ♥ symbol in the upper right corner flashes to indicate a working
HART connection.