Martel Electronics LC-110/H User Manual
Page 25
23
When data acquisition is complete, the Function Select Menu
described in section 6.5 is displayed.
6.4 Disconnect
This display is shown before returning to the main display to allow
the user to disconnect the LC-110H from the loop.
Disconnect from Loop
Press Menu/Exit to
exit HART mode
6.5 Function Select Menu
Tag Name ♥
Display Setup & Data
Modify Setup
Trim, Set, & Zero
Device Diagnostic
Data Log & Config Log
The tag name is truncated to fit on one line if necessary. The ♥
symbol in the upper right corner flashes to indicate a working HART
connection.
Rotate the knob to move the reverse video highlight to the desired
action. Press the knob to select the highlighted action and proceed
to the corresponding display described in sections 6.6 through 6.10.
Press MENU/EXIT to disconnect from HART mode and return to the
main display.
6.6 Display Setup & Data
This display spans 11 screens with the following general format. It
displays all of the data retrieved during the Data Acquisition
procedure described in section 6.3.3.