KYORITSU 6310 Quick Manual - Manual (Page 36)

KEW6310 Unbalance Ratio
Header of the saved data
AVG_A1[A]_1
︸ ︸ ︸ ︸ ︸
① ② ③ ④ ⑤
*Saved data with no number at this space contains the sum of the measured values.
Saving PFC calculation results
１
Press Start → Next → Next → Complete
to start recording after checking the
settings.
Press the Start Button at least 2 sec to start recording immediately.
Star
t
≪ Manual≫ ≪ Timer≫
File name for saving data is displayed.
▼
Data saving starts.
▼
appears and flashes.
Status indicator LED flashes.
▼
Stand-by until preset time comes.
▼
２ Preset start time comes.
Saving
▼
Status indicator LED is ON.
flashes and or is displayed.
(flashes in red according to the preset interval)
No setting change can be made during data saving.
３
▼
Press Stop .
▼
Preset termination time comes.
Stop
▼
File name for saving data is displayed.
Status indicator LED goes off.
and or goes off.
KEW6310 − 34 −
① INST ： Instantaneous value
AVG ： Average value
MAX ： Max value
MIN ： Min value
②
UV ： Voltage unbalance ratio
UA ： Current unbalance ratio
V ： Voltage of each phase
A ： Current of each phase
f ： Frequency
P ： Active power
Q ： Reactive power
S ： Apparent power
PF ： Power factor
PA ： Phase angle
DC ： Analogue input voltage
③ CH number ： *1 ∼ 4
④ Unit
⑤ System