KYORITSU 6310 Quick Manual - Manual (Page 31)

− 29 −
Transient measurement KEW6310
Transient measurement
Steps for measurement
Ensuring your safety
↓
Preparation for measurement
↓
Setting
↓
Wiring
↓
Transient Measurement Range
* Readings are displayed right after the recording of Transient measurement starts.
Timing of data recording
Measured data will be saved when an event occur or at the preset interval during measurement.
Recording at event occurrence Recording at every interval
File ID： 6310-08 File ID： 6310-14
Inst value : max value of 10,000 data obtained at 100us 1sec before the preset interval comes
Avg value : Avg of inst values obtained in the preset inst interval
Max value : Max inst values obtained in the preset inst interval
Min value : Min inst values obtained in the preset inst interval
KEW6310
Range
Measurement setting Save Setting
Transient measurement Recording method
Interval Recording start
V Range Recording termination
Threshold value Destination to save data
Hysteresis Destination to save screen shot
Trigger point
Setting
Example
Threshold Value 110％
Hysteresis 1％
Trigger point
Before: 100
After: 100
Setting
Example Interval
30min
Interval（30min) Interval
(reference
Voltage)
Past100
date pts
201date pts
recorded
Trigger
Start
Peak(max)
Ave, max and min* values within
each interval are recorded.
Past100
date pts
Threshold
110％
100％