KYORITSU 6310 Quick Manual - Manual (Page 17)

− 15 −
５．
Instantaneous (Inst) value measurement
Steps for measurement
Ensuring your safety
↓
Preparation for measurement
↓
Setting
↓
Wiring
↓
Inst value measurement Range
Symbol displayed on the LCD
V Voltage A Current P Active
Power
＋ consumption
Q Reactive
Power
＋ lagging
− regenerating − leading
S Apparent
Power
PF Power
Factor
＋ lagging
PA Phase
Angle
＋ lagging
f Frequency
− leading − leading
An Neutral
current
DC1 Analogue input
voltage at 1ch
DC2 Analogue input
voltage at 2ch
Switching Screens / Zoom
Select a
system
Cursor Key
Select an
item
Cursor Key
Check
setting
details
ENTER Key
Save data
File ID : 6310-01
Saved time & date ELAPSED TIME Instantaneous Average Max Min
DATE TIME ELAPSED TIME INST AVG MAX MIN
yyyy/mm/dd h：mm：ss h：mm：ss (±)x.xxxE±nn
year/month/ date hour:min:sec hour:min:sec (±) value x 10 ±n
e.g. 1.234E+02=1.234x10 2 =123.4
Range
Basic Setting Measurement setting Save Setting
Wiring Interval Recording method
V Range Save item (W) Recording start
VT Ratio ・Inst value Recording termination
Clamp Sensor ・Avg value Destination to save data
A Range ・Max value Destination to save screen shot
CT Ratio ・Min value
Filter
DC V
Frequency
Measured
values
per CH
Total
measured
values
List Zoom
KEW6310
Instantaneous value measurement KEW6310
* Press F3 Key to switch the Zoom and List display.
Refer to “(Section 6) Instantaneous (Inst) value
measurement” for explanation on customizing the Zoom
display.