KYORITSU 6310 Quick Manual - Manual (Page 12)

KEW6310
KEW6310 Setting
− 10 −
４．
Setting
The “SET UP” consists of following 4 settings.
Basic Setting : Setting of the items common to all measurements
Measurement Setting : Setting of each measurement
Save Setting : Setting of data save methods
Other Setting : Environmental setting
Each setting
Press the Cursor Keys to browse through setting items.
Select any desirable items with Cursor Keys and confirm it with ENTER Key. Using the
ESC Key cancels the setting change. Following is an example to select the wiring to be tested at
basic setting.
1. Select a setting item
– Wiring
2. Select a proper wiring
configuration
3. Confirm the selected
wiring configuration
Move the cursor to “Wiring”,
and press the
ENTER Key.
Move the cursor to the wiring
configuration to be tested, and
press the ENTER Key.
Setting completes.
* Cursor will move onto any of the red parameters.