Chain port rx bytes, Chain port overrun errs, Chain port framing errs – ADTRAN ATLAS 810 Plus User Manual
Page 59: Clear chain port countrs, System config, Primary timing source, Backup timing source, System config -7, Primary timing source -7, Figure 6-3. system configuration menu -7
Chapter 6. Terminal Menu and System Control
61200266L1-1
ATLAS 810
PLUS
User Manual
6-7
» Chain Port Rx
Bytes
Read security: 5
Displays the number of received data bytes.
» Chain Port
Overrun Errs
Read security: 5
Displays the number of overrun errors.
» Chain Port
Framing Errs
Read security: 5
Displays the number of received framing errors.
» Clear Chain Port
Countrs
Clears all chain port counters. Press
Y
to activate command.
>
SYSTEM
CONFIG
The
System Config
menu allows you to set up the ATLAS operational con-
figuration. Figure 6-3 shows the items included in this menu.
Figure 6-3. System Configuration Menu
» Primary Timing
Source
Write security: 3; Read security: 5
Selects the primary timing source. You can select either
INTERNAL
or a port
from one of the installed modules.
» Backup Timing
Source
Write security: 3; Read security: 5
Selects the secondary timing source. You can select either
INTERNAL
or a
port from one of the installed modules. ATLAS 810
PLUS
uses the backup
timing source if the primary timing source goes into alarm. The
Backup
Timing Source
should be different from the
Primary Timing Source
.