Appendix a - ieee 488.2 command/query definitions, Table a-1. ieee 488.2 command/query index, A.2 *cls — clear status command – KEPCO ABC-DM SERIES User Manual

Page 65: A.3 *ese — standard event status enable command

ABC 040104

A-1

APPENDIX A - IEEE 488.2 COMMAND/QUERY DEFINITIONS

A.1

INTRODUCTION

This appendix defines the IEEE 488.2 commands and queries used with the ABC Power Supply
These commands and queries are preceded by an asterisk (*) and are defined and explained in
Figures A-1 through A-14, arranged in alphabetical order. Table A-1 provides a quick reference of
all IEEE 488.2 commands and queries supported in the ABC Power Supply.

A.2

*CLS — CLEAR STATUS COMMAND

*CLS

Syntax:

*CLS

Description: Clears status data. Clears the error queue of the instrument. It also clears the following registers

without affecting the corresponding Enable Registers: Standard Event Status Register (ESR), Opera-
tion Status Event Register, Questionable Status Event Register, and Status Byte Register (STB).
Related commands: *OPC, *OPC?. (See example, Figure A-1.)

A.3

*ESE — STANDARD EVENT STATUS ENABLE COMMAND

*ESE

Syntax:

*ESE where = positive whole number: 0 to 255 per Table A-2.
Default Value: 0

Description: This command programs the standard Event Status Enable register bits. The contents function

as a mask to determine which events of the Event Status Register (ESR) are allowed to set the ESB
(Event Summary Bit) of the Status Byte Register. Enables the Standard events to be summarized in
the Status Byte register (1 = set = enable function, 0 = reset = disable function). All of the enabled
events of the standard Event Status Enable register are logically ORed to cause ESB (bit 5) of the
Status Byte Register to be set (1 = set = enable, 0 = reset = disable)

(See example, Figure A-1.)

TABLE A-1. IEEE 488.2 COMMAND/QUERY INDEX

COMMAND

PAR.

COMMAND

PAR.

*CLS

A.2

*RST

A.11

*ESE, ?

A.3, A.4