KANOMAX 3800 Handheld Condensation Particle Counter - Manual (Page 32)

25
3.3.4.2 Printer Setup
To set the baud rate of the optional printer:
On the UTILITIES screen
(Screen-14) ,
select “2. PRINTER SETTING”
and press the [ENTER] key.
The Printer Setting screen
(Screen-16)
will be displayed.
Select “1. BAUD RATE” by using the
[UP]/[DOWN] key and press the [ENTER] key.
Select the value by using the [UP]/[DOWN] key,
and press the [ENTER] key to enter a change.
Baud rate can be selected from 4800, 9600, 19200, and 38400 baud.
To return to the UTILITIES screen
(Screen-14) , press the [LEFT] key, or select “2. RETURN” and
press the [ENTER] key.
3.3.4.3 Deleting Data
To delete all stored data:
On the UTILITIES screen
(Screen-14) ,
select “3. DATA DELETE” and press the [ENTER] key.
The Data Delete screen
(Screen-17)
will be displayed .
Select “1. ALL CLEAR” by using
the [UP]/[DOWN] key, and press the [ENTER] key.
Select 【YES】 or 【NO】 by using
the [UP]/[DOWN] key, and press the
[ENTER] key on the desired option.
If you select 【YES】, all stored data will be erased.
To return to the UTILITIES screen
(Screen-14) , press the [LEFT] key, or select “2. RETURN” and
press the [ENTER] key.
Caution
Screen-16 PRINTER SETTING
Screen-17 DATA DELETE
The communication format of the CPC is: No parity, Bit length: 8 bits, Stop bit: 1
The printer baud rate must be set to be consistent with the CPC.
For setting the printer, please refer to the instruction manual of your printer.