KANOMAX 3800 Handheld Condensation Particle Counter - Manual (Page 20)

13
3.2 Measurement Modes
There are four (4) measurement modes as listed below.
1. Mode --- For details see 3.2.1 Normal Mode (page 14).
After warm-up, the instrument will automatically transfer to this mode.
Particle number concentration (particles/cc) and absolute pressure (hPa) can be measured.
Measured data cannot be stored.
This mode also allows setting of the Menu and printing an instantaneous value.
2. Mode --- For details see 3.2.2 Repeat Mode (page 15).
The measurement is performed in accordance with the measurement condition set by the CPC.
Particle number concentration (particles/cc) and absolute pressure (hPa) can be measured.
Measured data can be stored.
3. --- For details see 3.2.3 Programmed Mode (page 16).
The measurement is performed in accordance with the measurement program .set by the PC,
and written in the CPC.
Particle number concentration (particles/cc) and absolute pressure (hPa) can be measured
automatically.
Measured data can be stored.
4. Mode --- For details see 3.2.4 Count Mode (page 17).
Counts up the number of particles measured during a random time interval.
The number of particles and absolute pressure (hPa) can be measured.
Measurement Start/Stop is manually operated.
Measurement data cannot be stored.
This mode is suitable for performing a measurement in an environment where the particle
number concentration is low.