How to take measurements – KANOMAX 3800 Handheld Condensation Particle Counter User Manual
Page 17
10
3. How to Take Measurements
Press the power switch located at the side of the CPC to turn on the CPC.
A screen indicating the CPC model and firmware version information will be displayed. Then it will
automatically switch to a warm-up screen
(Screen-1)
. Warm-up takes about 600 seconds. The
warm-up time remaining will be counted down on the display.
Menu operation can be performed from this screen by pressing the [ENTER] key.
For descriptions of the Menu operation, see 3.3. Menu Setting (page 18).
Warm-up can be canceled by pressing the [UP] key.
When warm-up is completed or cancelled, the screen will switch to the
(Screen-2).
For descriptions of the
Caution
Screen-1
Warm-up Screen
Remaining
warm-up time
Indication of
warm up status
When warm-up is cancelled before its completion, remaining warm-up
time will be displayed on the
(Screen-2)
. While
this warm-up time is displayed, the measurement value will not be
accurate.