KANOMAX 3800 Handheld Condensation Particle Counter User Manual
Page 13
6
2.1.2 AC Adapter Setup
Insert the DC plug of the AC adapter into the
DC-9V connector located at the right side of the
CPC. When the AC adapter is connected, even if
the batteries are installed, the power will be
supplied from the AC adapter. There is no
problem having the batteries installed in the
battery compartment, however, if the batteries are
not to be used for a long period, they must be
removed from the battery compartment to avoid
battery corrosion causing a contact failure.
Model: S-8458
Input: AC100-240V
Output: DC9V 1.4A
Polarity:
Caution
The AC adapter supplied with the instrument (MODEL S-8458) must be used.
Use of other commercially-available AC adapters may cause short circuit or
fire hazard, due to the possible difference in polarity.