KANOMAX 3800 Handheld Condensation Particle Counter - Manual (Page 28)

21
3.3.3 Data Output
To view, print and delete stored data:
On the MENU
(Screen-8) select “4. DATA OUTPUT”, and press the [ENTER] key.
The display will switch to a screen displaying a count result of the latest stored data (Screen-11) .
* When there is no data, you will see a message “NOT RECORDED”, and the display will
automatically return to the MENU (Screen-8) .
Each item indicates:
“S-TIME” = Sampling length;,
“S-TIMES”= Number of sampling frequency
“AVG/MAX/MIN”= Average/Maximum/Minimum value of particle number concentration under
measurement.
“P AVG/P MAX/P MIN”= Average /Maximum/ Minimum value of absolute pressure under
measurement.
To view previous or next data from the displayed data, press the [UP]/[DOWN] key.
To return to the MENU
(Screen-8) , press the [ENTER] key .
To view the details of the count result displayed on
Screen 11 , press the [LEFT] key and detail data
will be displayed (Screen-12) .
Each item indicates:
“TIME” = Sampling length
“DATA” = Particle number concentration [particles/cc]
“PRES.” = Absolute pressure at inlet [hPa]
“S”= Error status
For details of the error status, see 1.2 Operation Panel, List of Error Messages (page 3).
If the number of “S-TIMES” is 7 or more, you can move to the next page by using the [UP]/[DOWN]
key.
To return to the count result screen
(Screen-11) , press the [LEFT] key.
To switch to the DATA UTILITIES screen
(Screen-13) where each count result (and its detail data)
can be deleted and/or printed by using an optional printer, press the [RIGHT] key on the count
result screen
(Screen-11) .