KANOMAX 3800 Handheld Condensation Particle Counter User Manual
Page 26
19
3.3.1 Repeat Mode Setting
To setup a measurement in
On the MENU screen
(Screen-8)
,
select “2. REPEAT SETTING” and press
the [ENTER] key. The display will
switch to the “REPEAT SETTING” screen
(Screen-9)
.
Items to be set are:
1. S-TIME --- One sampling length [second].
2. S-TIMES --- Number of sampling times of the above.
For details see, 3.3.2 Viewing Program, - Description of Term- (page 20).
The maximum sampling length is 10,000 seconds, and the maximum number of sampling times is
10,000.
For setting the above, select the desired item by using the [UP]/[DOWN] key, and press the
[ENTER] key.
Use the [LEFT]/[RIGHT] key to move between the digits, and the [UP]/[DOWN] key to
increase/decrease the values.
When the setting is complete, press the [ENTER] key to enter the change.
To return to the MENU
(Screen-8)
, press the [LEFT] key or select “3. RETURN” and press the
[ENTER] key.
Screen-9
REPEAT SETTING