KANOMAX 3800 Handheld Condensation Particle Counter - Manual (Page 12)

5
2. Setup Before Measurement
2.1 Battery / AC Adapter Setup
The CPC may be powered by batteries or an AC adapter.
Setup the batteries or the AC adapter whichever is appropriate for your use.
2.1.1 Battery Setup
3. Close the lid in the reverse
procedure of opening the lid.
2. Install the batteries. (* Note the polarity of the batteries.)
Six (6) AA batteries are required. Use alkaline batteries or
Ni-MH(nickel metal hydride) batteries. All of the six batteries
must be of the same type. Using different types of batteries
may result in leakage, or damage to the instrument.
* The batteries cannot be charged by the AC adapter.
1. Slide the battery compartment lid located at
the backside of the instrument in the direction
of the arrow, and remove the lid.
Applicable Battery Types:
- Alkaline Battery (AA)
- Ni-MH battery (AA)