In-Situ TROLL Link Telemetry System Operators Manual - Manual (Page 12)

800-446-7488 12 www.in-situ.com
l
APN Name: ccspbsc095.acfes.org or romcomm.apn
l
APN User ID: (blank)
l
APN Password: (blank)
Installing the TROLL Link Software
1. Install the TROLL Link Setup Utility and Win-Situ 5 Plus Software to your local hard
drive. The software can be installed using the In-Situ software CD or downloaded
from www.in-situ.com/TelemetrySoftware
2. Follow the installation wizard prompts for both programs to complete the
installations.
3. When prompted, install the COM drivers at the end of each software installation.
4. Launch the TROLL Link Setup Utility software.
5. Click Yes to activate the software. A dialog box opens and displays the hardware
key.
6. Send an email to [email protected] with the hardware key and your sales order
number. If you do not have your sales order number you will need to provide
additional information.
7. Technical Support will reply to your email with a license key and an activation code.
Write these numbers in the space provided below.
TROLL Link Setup Software License Key:
__________—__________—__________—__________
TROLL Link Setup Software Activation Code:
__________—_______________
Win-Situ 5 Plus Software License Key:
__________—__________—__________—__________
Win-Situ 5 Plus Software Activation Code:
__________—_______________
8. Enter the TROLL Link Setup Software license key and activation code into the
software dialog box and click the check mark.
9. Launch Win-Situ 5 Plus software.
10. Click Yes to activate the software.
11. Enter the Win-Situ 5 Plus license key and activation code into the software dialog
box and click the check mark.