In-Situ Con TROLL PRO Operators Manual (purchased after 10 May 2012) - Manual (Page 39)

800-446-7488 39 www.in-situ.com
10. Click the COM Ports tab. Note the Port number of the Outgoing port (in this example,
Port 17). You will need to select this port in the Win-Situ 5 Comm Settings window.
Configuring the Bluetooth Utility for PCs Not Factory-Enabled with Bluetooth
Communications (Example)
The following example shows how to configure the Bluetooth utility provided with the
Cirago Bluetooth USB Adapter using Toshiba 6.0 Software and Drivers. If you have a
different third-party Bluetooth USB adapter and software CD, you will have a different
set of steps. The steps below are provided for illustrative purposes only.
1. Install the Bluetooth drivers from the manufacturers disk provided with the Bluetooth
hardware adapter.
2. Start the Bluetooth connection manager from the icon in the bottom right corner of
the screen.