HT instruments VEGA78 - Manual (Page 105)

VEGA78
EN - 103
5.5.4. Saving recordings to external Compact Flash
The VEGA78 meter permits to save the recordings also on external standard compact
flash which are fitted on suitable input (see Fig. 3) after activating “EXTERNAL” option on
Memory type (see § 5.1.7). The following is shown by meter:
12/09/2006 – 16:55:10
RECORDING SETTINGS

 Comments: POWER&ENERGY
 Start:Manu
 Stop:Manu
 Integration Period:15 min
 Cogenerations
+  General Parameters 
52/251 Parameters – Autonomy: 231d 5h
CLP/EXP PREDEF. SEL MODIFY
Fig. 178: Example of use of external memory - compact flash not fitted
In the example of Fig. 178 a “POWER & ENERGY predefined configuration with an
autonomy of 231d 5h in condition of compact flash not fitted was been considered. Insert
compact flash on meter, exit from the above screen by pressing ESC key (or the smart
icon ) and open again the same screen, the below screen is shown by meter:
12/09/2006 – 16:55:10
RECORDING SETTINGS

 Comments: POWER&ENERGY
 Start:Manu
 Stop:Manu
 Integration Period:15 min
 Cogenerations
+  General Parameters 
52/251 Parameters – Autonomy: 511d 0h
CLP/EXP PREDEF. SEL MODIFY
Fig. 179: Example of use of external memory - compact flash fitted
The correspondent icon is shown by meter in the top of display after fitted the Compact
Flash on meter and the value of autonomy is automatically updated at display (511d 0h in
the example of Fig. 179).
CAUTION
The passage from internal memory (about 15Mbytes) to external memory
with compact flash option permits to save a recording with size up to
32Mbytes independently on dimension in Mbytes size of compact flash.