GW Instek GDS-1000A Series Freewave user manual - Manual (Page 42)

Freewave Manual
42
Operation log Control panel
Date
Command
description
Command
move icon
Command
select icon
Selected
commands
Command
list
4. Click on the command category
to show each command
(example: voltage measurement
commands).
5. Click on a command and then click on the right
arrow to copy the command into the command
list (example: MEAS:SOUR command).
→ →
6. Repeat this until all commands are copied into
the command list.
Deleting a
command Click on a command in the command list and then
click on the left arrow. The command will be
deleted from the list.
→ →