GW Instek GDS-1000A Series Freewave user manual - Manual (Page 22)

Freewave Manual
22
3. Locate the oscilloscope either in the “Port” node (correct) or in
the “Other devices” corner (incorrect).
Port (correct) Other devices (incorrect)
 If the oscilloscope is correctly recognized (Port node), repair the
Freewave installation (page25).
 If the oscilloscope is incorrectly recognized (Other devices node),
follow the next step.
Note The COM port for the DSO should be set between
COM1 to COM20. If the COM port is greater than 20,
it can’t be detected by DSO.
4. Right-click on the oscilloscope name and select “Update Driver”
from the context menu. The driver installation dialog box should
appear.
5. Install the DSO driver from the Freewave install directory.