GW Instek GDS-1000A Series Freewave user manual - Manual (Page 15)

Installing Freewave
15
Installation Steps
Follow these steps to properly install Freewave:
 Download and install the software package. Two versions of the
software package (32 bit and 64 bit) are provided. Please select
the appropriate version to download.
 Connect the oscilloscope to the PC.
 Verify the connection and operation.
Installing the Software Package
1. Unzip the software package into an installation directory.
2. Activate setup.exe. if a dialog box appears for the Microsoft .Net
(full version 4.0 or later) framework.