GW Instek PST series Programming Manual - Manual (Page 9)

PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
⎯ 15 ⎯
:OUTPut:PROTection:CLEar Clears over-voltage and over-current and
over temperature protection error message.
:OUTPut:STATe Sets the output state on or off.
:OUTPut:STATe ? Returns the output state on or off.
Remark:
The mark “★1” means the for PSS and PSH series can only be 1.
The mark “★2” means the PSS and PSH series do not have the function.
z Status Commands
Table 3 lists the status commands that set and query the various
registers and queues that make up the status and event structure of the
programmable power supply.
Table 3: Status Commands
*CLS Clears the status data structures.
*ESE Sets the Event Status Enable Register
(ESER).
*ESE? Returns contents of Event Status Enable
Register (ESER).
*ESR? Returns and clear the contents of Standard
Event Status Register (SESR).
*SRE Sets contents of Service Request Enable
Register(SRER).
PST & PSS & PSH SERIES PROGRAMMABLE POWER SUPPLY
PROGRAMMER MANUAL
⎯ 16 ⎯
*SRE? Returns contents of Service Request
Enable Register (SRER).
*STB? Reads Status Byte Register (SBR).
:STATus:OPERation:COND
ition ? Returns the contents of the OPERation
condition register. Returns NR1.
:STATus:OPERation:ENAB
le Sets the contents of the enable mask for the
OPERation event register.
:STATus:OPERation:ENAB
le ? Returns the contents of the enable mask for
the OPERation event register. Returns NR1.
:STATus:OPERation:EVEN
t ? Query the contents of the OPERation Event
register.
:STATus:PRESet Presets the OPERation and QUEStionable
status registers.
:STATus:QUEStionable:CO
NDition ? Returns the contents of the OPERation
condition register. Returns NR1.
:STATus:QUEStionable:EN
ABle Sets the contents of the enable mask for the
QUEStionable enable register.
:STATus:QUEStionable:EN
ABle ? Query the contents of the Questionable
Enable register.
:STATus:QUEStionable:EV
ENt ? Query the contents of the QUEStionable
Event register.
z Miscellaneous Commands
Table 4 lists the miscellaneous commands that control general
housekeeping functions of the programmable power supply.