GW Instek GDS-3000 Series DS3-PWR Power analysis manual - Manual (Page 35)

MEASUREMENT
35
4. Connect and turn on the power source when all
the connections have been made and
configured.
Panel operation 1. Press the Test key.
2. Press Power Analysis from the
bottom menu.
3. Press Inrush Current from the side
menu.
4. The automatic measurements for inrush current
appear measuring the first and second inrush
current peaks. (default settings)
Example
5. Press Define Inputs from the lower
menu.
6. Choose the Current input (source)
from the side menu.
Range CH1~4, Ref1~4