5 configuring fire panels, Configuring fire panels – Fire-Lite PS-Tools MS-9050 User Manual
Page 29
50 Pt Addr Panel
PS-Tools
08/2010
21
5
5 Configuring Fire Panels
Using PS-Tools, you can configure the fire panel settings. Configuring a fire panel involves:
•
Configuring the settings for input and output modules.
•
Configuring the fire panel settings such as date and time, banner display, fire panel
passwords, and other panel settings.
•
Configuring the SLC loop setup for the detectors and modules.
•
Verifying the SLC loop setup.
•
Simulating the setup to evaluate SLC loop.
•
Modifying the customer details in the server.
•
Migrating the configuration information from PK-Plus to PS-Tools database.
After you configure the fire panel settings, connect the computer to the fire panel and download the
configuration settings. In addition, you can upload the configuration information from the fire
panel, and view the fire alarm system settings in PS-Tools.
The following table describes the tasks you can perform using different sections of this chapter.
Section
Description
Refer to
Selecting Configuration
Type
To select a configuration type in
PS-Tools.
Configuring System Info
To configure the communicator settings,
input/output modules, and the general
system settings.
SLC Loop Setup
To add detectors and modules to the
SLC loop.
Save to Database
To save the configuration in the
PS-Tools
database.
Save as Template
To save the configuration as a template.
Verify Setup
To verify the SLC loop setup.
Simulation
To view the zone correlations for the
installed devices, to confirm the pro-
gramming.
Upload Information
To view the uploaded information from
the 50 Pt Addr panel.
Comparing Configuration
To compare the configuration for two
different customers.