Ldm-e32f, Features 1. introduction – Fire-Lite LDM-32F Lamp Drivers User Manual
Page 11

Features
1. Introduction
LDM-32F PN 50055:C 03/20/01
11
LDM-E32F
Each LDM-E32F expander module provides 32 additional lamp/LED driver
outputs from J5, J6, J7 and J8. The expander module has a slide switch SW4
for selecting alarm or alarm and trouble annunciation and an input for a local
lamp test switch. In alarm mode, use only one LDM-32F and one LDM-E32F
for a maximum of 56 alarm indicators and 8 system status indicators. In alarm/
trouble mode, use one LDM-32F and three LDM-E32Fs for a maximum of 56
alarm indicators, 56 trouble indicators, 16 status indicators and 64 optional
control switch inputs. Multiple sets of LDM-32Fs with LDM-E32F expanders
increase the system annunciation capabilities beyond 56 zones or points. This
is possible by various settings of address switches SW1 and SW2 on the LDM-
32F (refer to Appendices). Each LDM-E32F is supplied with a 26-conductor
expander ribbon cable, 4 standoffs and 4 screws.
Figure 2 LDM-E32F
LD
M-
E
3
2F.cd
r
Output Connectors
for Wiring to LEDs
Ribbon Cable
Connections to
Next LDM-E32F
Ribbon Cable
Connections from
LDM-32F or
Previous LDM-E32F
Security Key
Switch Terminal
Control Switch
Terminal
Alarm or
Alarm/Trouble
Slide Switch
Not Used