Edwards Signaling Integrity Synchronized Temporal Horn-Strobe - Manual (Page 5)

P/N 3100376 • REV 6.0 • ISS 06MAY11 5 / 6
Regulatory information
Manufacturer
Edwards, A Division of UTC Fire & Security
Americas Corporation, Inc.
8985 Town Center Parkway, Bradenton, FL
34202, USA
Year of
manufacture The first two digits of the date code (located on
the product identification label) are the year of
manufacture.
UL rating Regulated 24 DC, regulated 24 FWR [1]
Environmental
class Indoor, outdoor
Synchronization Meets UL 1971 requirements. Maximum allowed
resistance between any two devices is 20 Ω.
Refer to specifications for the synchronization
control module, this strobe, and the control panel
to determine allowed wire resistance.
North American
standards Meets: CAN/ULC-S525-07, CAN/ULC -S526-07,
UL 464, UL 1638 and UL 1971
Follow: NFPA 72 and CAN/ULC-S524
FCC compliance This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules and
regulations.
[1] This device was tested to the regulated 24 DC/FWR operating
voltage limits of 16 V and 33 V.
Contact information
For contact information, see www.utcfireandsecurity.com.