Detcon PI-700 0-500ppb - Manual (Page 46)

Model PI-700 0-500ppb
PI-700 0-500ppb Instruction Manual Rev. 0.0 Page 42 of 53
Status Indicators: 4-digit LED Display with gas concentration, full-script menu
prompts for AutoSpan, Set-up Options, and Fault Reporting
Faults Monitored:
Loop Fault, Input Voltage Fault, Missing Sensor Fault,
Zero Fault, Processor Fault, Memory Fault, Calibration Fault(s)
Cable Requirements:
Power/Analog: 3-wire shielded cable
Maximum distance is 13,300 feet with 14 AWG
Serial Output: 2-wire twisted-pair shielded cable specified for RS-485 use
Maximum distance is 4,000 feet to last sensor
Mechanical Specifications
Height: 14 inches
Width:
13 inches
Weight:
6.5 lbs
Mechanical Connection:
¾” Male NPT threaded connection
Electrical Connection: 6-Pin connector to TPA
9.2 Gas Reference Table