Triton FT5000 X2 User Manual - Manual (Page 96)

522 EJ error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
523 EJ data size error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
524 EJ bad command Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
525 EJ invalid ID Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
526 EJ device busy Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
527 EJ invalid request Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
528 EJ sequence error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
529 EJ device offline Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
530 EJ EXT error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
531 EJ SOH error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
532 EJ STX error Restart operating system. I the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
533 EJ BCC error Restart operating system. If the problem persists, it may be necessary to
replace the ATM main board assembly on Xscale systems, or the PC
assembly or hard drive on the xp or 9800 systems..
534 EJ device reset Restart operating system. If the problem persists, it may be
necessary to replace the ATM main board assembly on Xscale
systems, or the PC assembly or hard drive on the xp or 9800
systems..
535 Card Reader - Data size error Inspect card reader cabling. Inspect card reader for foreign objects.
Clean the card reader with an approved cleaning device. Clear the
terminal error code. Reboot the ATM. If error persists, replace the
card reader.
536 Card Reader - Device read error Inspect card reader cabling. Inspect card reader for foreign objects.
Clean the card reader with an approved cleaning device. Clear the
terminal error code. Reboot the ATM. If error persists, replace the
card reader.
537 Card Reader - Invalid Record Inspect card reader cabling. Inspect card reader for foreign objects.
Clean the card reader with an approved cleaning device. Clear the
terminal error code. Reboot the ATM. If error persists, replace the
card reader.
538 Card Reader - Reader type error Inspect card reader cabling. Inspect card reader for foreign objects.
Clean the card reader with an approved cleaning device. Clear the
terminal error code. Reboot the ATM. If error persists, replace the
card reader.
32