Triton FT5000 X2 User Manual - Manual (Page 25)

2 1
C ASSETTE C LOSE / C ASH R EPLENISHMENT
L
OADING
N
OTE
C
ASSETTES
4. Level the note pile and move the packer plate against the notes with just enough pressure to hold the
notes.
5. Move the white plastic levers (Pawls) on the pusher plate to their fully extended position. This will
allow the pusher plate to retract and relieve pressure from the note stack when an unlock command
is sent to the dispenser.
“Pawls” extended.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are
being added into the cassette.
3. Add the number of bills being placed into the cassette to the number that remained. The “Total”
number of these bills will be entered in the “E
NTER C ASSETTE Q UANTITY ” option.
1. Move the pusher plate to the rear of the cassette (toward the handle). Ensure the pusher plate is fully
back. It should stay in this position.
Slide packer plate
against notes.
Slide packer plate
towards rear.
Load/level notes.
6. Close the cassette lid. Fold the lid down to its locked position. The release button should “pop” out,
allowing the lid to mate cleanly with the body of the cassette. You may need to “tap” the lid firmly along
the front edge to achieve this. Turn the key “counterclockwise” to lock the cassette.