Triton FT5000 X2 User Manual - Manual (Page 22)

1 8
M
ODEL
FT5000 (X2) U
SER
M
ANUAL
C
ASSETTE
C
LOSE
P
ROCEDURES
Follow Access instructions to enter M ANAGEMENT F UNCTIONS . Select T ERMINAL C LOSE F UNCTIONS . Select
C ASSETTE C LOSE .
Select cassette(s) to Close. A check mark (
√
)
identifies which cassette(s) are selected. Press
NTER
>.
After cassette(s) have been reinserted in the
dispenser, press NTER >.
Note: For an NMD-50/100 dispenser installed, wait
for the cassettes to LOCK (this is done automatically).
Press if applicable.
A Close report is displayed to be printed or
saved. This operation will reset the number of bills
in the cassette(s) to ZERO (0). Press
NTER >.
Remove and Replenish the selected cassette(s).
Procedures for cassette replenishment
start on page 20.
Note: For an NMD-50/100 dispenser installed, wait
for the cassettes to UNLOCK (this is done automatically).
P lace selected cassette(s) IN SERVICE. Press
NTER >. Note: The NMD-50/100 cassettes Must be
Locked and In Service for normal operation.
Enter Cassette Quantity (number of notes, NOT
value) for the selected cassette(s). Press NTER >
to accept entry. Repeat for each selected cassette.
A Trial Cassette Close report automatically is
displayed to be printed or saved. Print and retain a
copy for starting point reference. Press
NTER > to
return to Close functions.