Spectra Precision ADLCONF User Guide User Manual
Page 19
19
ADLCONF User Guide
retransmit each data packet it receives. Checking this option displays different fields
depending on the selected protocol. If you selected a non-Trimble protocol and then
check the Repeater check box, the Repeater Delay field appears.
Enter the amount of time you want to elapse between receipt of a data packet and its
retransmission. You may enter any value between 0 and 255.
If you selected the TRIMTALK 450S, TRIMMARK II/IIe, TT450S (HW), or TRIMMARK 3
protocol and then select the Repeater check box, the following repeater modes become
available:
• Select
the
BASE with One Repeater option to configure the attached radio as a base
station transmitting RTK corrections to one repeater radio
• Select
the
BASE with Two Repeaters option to configure the attached radio as a base
station transmitting RTK corrections to two repeater radios
• Select
the Repeater One option to configure the attached radio as a single repeater
or the first of two repeaters
• Select
the
Repeater Two option to configure the attached radio as the second of two
repeaters