Seed Hawk 30 SERIES 2015 - Manual (Page 79)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 74
• Lubricate galvanized and chrome-plated surfaces with grease before long
periods of storage.
To preserve the high quality of the seed drill, always use genuine Seed
Hawk
® aftermarket parts.
6.3 Hydraulic Cartridges
6.4 Hydraulic Cylinders
Hydraulic cartridges, which are located on hydraulic block, should only be
removed, inspected and cleaned at the end of each seeding season if problems
occur with them. Some cartridges may be disassembled for additional access
for cleaning. It is recommended that the disassembly and further cleaning of this
type of cartridge be performed by a technician trained in hydraulic component
servicing.
Inspect hydraulic cylinder seals and hose connections at cylinder fittings every
10 hrs or daily. Tighten any loose fittings. To replace worn or damaged cylinder
seals, contact a technician trained in hydraulic maintenance and repairs if assis-
tance is required for replacing cylinder seals.
Hose Fitting
Cylinder Seals