Seed Hawk 30 SERIES 2015 - Manual (Page 66)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 61
5.9 Opener Shank Operation
3. Lock the tractor hydraulics lever
that the GREEN banded hoses (wing
circuit) are connected to. The full
tractor pressure is shown on the top
right (4000 psi gauge) of the hydraulic
manifold block.
Full Tractor Pressure
4. Moving in a forward direction press
the
ACK (Activate Clutch Key)
on the monitor. This will engage the
opener shank
s.
Start Up Alarm: Indicates a con-
nection problem between the motor
sensor and the control module. Meter Stopped: Meter is not turn-
ing with ground speed present and
drive engaged.
1. Ensure that there is power going to the Seed Hawk Loup III monitor.
2. Engage the tractor hydraulics lever that the RED band hose (opener circuit)
is connected to.
200
1000
400
800
600
10
20
30
40 bar psi
1000
50 250
2000
100
275
3000 150
bar
4000
psi
200