Seed Hawk 30 SERIES 2015 - Manual (Page 40)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 35
5.2 Normal Start up
NOTE: For everyday op-
eration, the monitor will
remember all settings that
have been saved from the
previous use.
Activate Drive Key: This key is used to engage your clutch or disengage your
clutch. (Reminder: Clutch Status is indicated in the Top Section of the
Display).
Meter Rate Screen: Pressing this Key brings up a screen which allows adjust-
ing meter application rates and turning meters on and off.
Soft Keys: These keys allow the user to access specific functions within a
certain menu. The soft key options will be displayed along the right side of the
screen, which the operator can select by pressing the corresponding soft key.
1. Press the Power Key to begin.
2. As the Seed Hawk Logo is dis-
played, the monitor performs a self-
test. During this self test, the monitor
will check that all learned sensors are
connected.
3. Once this test is complete, all sen-
sors found by the system are listed as
shown in the image.
4. Press the Soft Key labeled “OK”
to continue to the Normal Operate
Screen.