Seed Hawk 30 SERIES 2015 - Manual (Page 50)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 45
1. This item will allow the user to re-
store the monitor to factory defaults
on all global settings. This is useful
when moving the monitor to a new
installation or when it is necessary to
reprogram the system.
5.4.3 Restore Settings to Default
2. A dialog box will appear to verify
the selection before any setup chang-
es are made in case this item was
chosen accidentally. Once reset, the
previous settings cannot be recovered
and must be set individually.
7. Master Switch Mode: The choic-
es are “Manual” and “Auto”. Manual
is used when the operator engages
and disengages the drive by pressing
the
ACK (Activate Clutch Key)
at the beginning and end of each pass.
Auto is used when a lift switch on the
implement engages and disengages the
drive. Manual is the normal mode of
operation.
8. OK/Cancel: Select “OK” to save
any changes that have been made or
"Cancel" to ignore changes that have
been made.