Seed Hawk 30 SERIES 2015 - Manual (Page 48)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 43
5.4.2 Global Settings
This menu allows the user to set the units of measure, language, implement
width, the volume of the alarm, screen settings (backlight and contrast), and the
master switch mode. To access the Global Settings from the run screen press
any
Soft Key to bring up the Soft Key Menu and press the Soft Key labeled
"Setup". Navigate the highlight bar to the “Global Settings” selection and press
the
Enter Key.
At this screen you can review the basic system setup and make changes as
necessary. To make changes, navigate the selection box to the item you wish to
adjust and press the
Enter Key. A drop down box will appear and display the
available options. Select the desired setting and press the Enter Key.
1. Units: Available choices are Metric,
Imperial, and US Imperial. Navigate to
the desired selection and press
the
Enter Key.
2. Language: Available choices are
English, Russian, French, German,
Spanish, Latvian, Estonian, Swedish,
Danish, Dutch and Finnish. Navigate
to the desired language selection and
press
the Enter Key.