LumaSense Technologies INNOVA 1309 - Manual (Page 39)

Chapter 4
________________________________________________________________________
________________________________________________________________________
BE1285-15 1309 Multipoint Sampler LumaSense Technologies A/S
Page 39 of 42
Table 4.6 Standardised interface jobs which perform various secondary
functions of the 1309.
Job Header Data Effect on 1309
De-
fine_Terminator
Decimal value of the
ASCII control character
Selects the terminator
character for interface
jobs.
Identify? No data Outputs INNOVA 1309
Output_Header EXclusive
Inclusive Disables/enables the
1309 to output the min-
imum code of the job
header with the appro-
priate data, in response
to the output jobs listed,
section 3.2.2 .
*IDN? No data. Outputs
INNOVA
1309,0,VPXXXX
*RST No data. Identical to Re-
set_System.
*SRE Identical to the job Ser-
vice_Request_Enable.
*SRE? No data Identical to the job Ser-
vice_Request_Enable?
*STB? No data Reads-out the status
byte from the 1309.
*TST? No data Indicates if the Warning
or Error flags are set.
The 1309’s condition is
given as follows;
0: Normal
1: Warning flag(s) set
-1: Error flag(s) set
The flags can then be
read-out using the
Warning? or Error? jobs.