1 preliminary – LumaSense Technologies INNOVA 1309 User Manual
Page 11

Chapter 2
________________________________________________________________________
________________________________________________________________________
BE1285-15
1309 Multipoint Sampler
LumaSense Technologies A/S
Page 11 of 42
2.1 Preliminary
2.1.1
Environment and Handling
The Type 1309 Multipoint Sampler is designed for use in environments
with temperatures between +5°C and +40°C (+41°F and +104°F) and
with up to 90% relative humidity (non-condensing) at 40°C.
Make sure to leave some space between the Rear Panel and the Wall,
or other obstacles, to ensure easy access to the mains supply. No other
special handling precautions are necessary.
2.1.2
Connecting the Mains Supply
The 1309 is operated from a 50 to 60 Hz single phase AC mains supply.
Voltage 100 – 240 Vac.
Before connecting the mains supply, the following checks and adjust-
ments should be performed to ensure safe operation of the 1309.
2.1.3
Checking the Power Cord
Use the Power Cord delivered with the 1309 or check that the Cord
used is rated minimum 10A / 250V.
2.1.4
Checking the Fuses
Use a small flat-bladed screwdriver to prise open the flap surrounding
the AC Mains switch. See Fig. 2.1.
Fig.2.1. Accessing the 1309’s fuses