LumaSense Technologies INNOVA 1309 - Manual (Page 37)

Chapter 4
________________________________________________________________________
________________________________________________________________________
BE1285-15 1309 Multipoint Sampler LumaSense Technologies A/S
Page 37 of 42
4.2.1 Sampler System Jobs
These jobs control the 1309’s sampler system. Further information
about these jobs is given in section 3.3 .
Table 4.1 The interface jobs which control the 1309’s sampler system
Job Header Data Effect on 1309
Open_Sampling_Valv
e Up to 12 sampling-
valve numbers Opens the specified
sampling valves
Con-
nect_Sampling_Valv
e
To_Monitor
To_Sampling_Pump
Routes the air-sample
either to the gas moni-
tor, or to the Waste
Air Outlet.
4.2.2 Temperature Measurement Jobs
This job controls temperature measurement with the 1309.
Table 4.2 The interface jobs which control the 1309’s temperature-
measurement function.
Job Header Data Effect on 1309
Sen-
sor_Temperature
?
Specific temperature-
sensor number
Reads-out the tempera-
ture (°C) at the specified
temperature-sensor.
4.2.3 Pressure Measurement Jobs
This job measures the atmospheric pressure around the 1309.
Table 4.3 The interface jobs which control the 1309’s pressure-
measurement function.
Job Header Data Effect on 1309
Pressure? No data Reads-out the atmos-
pheric pressure (kPa)
surrounding the 1309.