Manual record and continuous capture, 5 manual record and continuous capture – LT Security LTN8600 Series NVR (V2.3.2) User Manual
Page 74
User Manual of 9600/8600/7700/7600 Series NVR
74
5.5 Manual Record and Continuous Capture
Purpose:
Follow the steps to set parameters for the manual record and continuous capture. Using manual record and
continuous capture, you need to manually cancel the record and capture. The manual recording and manual
continuous capture is prior to the scheduled recording and capture.
Steps:
1.
Enter the Manual settings interface.
Menu> Manual
Or press the REC/SHOT button on the front panel.
Figure 5. 20 Manual Record
2.
Enabling Manual Record
1) Select Record on the left bar.
2) Click the status button before camera number to change
to
.
3.
Disable manual record.
Click the status button to change
to
.
Note:
Green icon
means that the channel is configured the record schedule. After rebooting, all the
manual records enabled will be canceled.
4.
Enabling and disabling the continuous capture
1) Select Continuous Capture on the left bar.
Figure 5. 21 Continuous Capture
2) Click the status button before camera number to change
to
.
3) Disable continuous capture.
4) Click the status button to change
to
.
Note:
Green icon
means that the channel is configured the capture schedule. After rebooting, all the
continuous capture will be canceled.