LT Security LTN8600 Series NVR (V2.3.2) - Manual (Page 164)

User Manual of 9600/8600/7700/7600 Series NVR
164
10.5 Migrating and Extending
Purpose:
When the remaining storage space is lower than the actual needs, you can take array migration and online extend
to enlarge the capacity of the virtual disk.
Before you start:
At least one available physical disk should exist for the array migration.
Steps:
1. Enter the Physical Disk Settings interface. At least one available physical disk should exist for the array
migration.
Menu>HDD>RAID>Physical Disk
Figure 10. 29 Physical Disk Settings Interface
2. Click Array tab to enter the Array Settings interface.
Figure 10. 30 Array Settings Interface
3. Select the array to be migrated and click to enter the Migrate Array interface.
Notes:
1) Only migrating from RAID 5 to RAID 5 is supported by the device.
2) If there is no virtual disk existing under the array, the array migration cannot be done.
3) If the virtual disk of the array is under initialization, the array migration cannot be done.