LT Security LTN8600 Series NVR (V2.3.2) - Manual (Page 203)

User Manual of 9600/8600/7700/7600 Series NVR
203
14.4 Configuring More Settings for Device
Parameters
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 14. 4 .
Figure 14. 4 More Settings Interface
3. Configure the following settings:
•
Device Name: Edit the name of NVR.
•
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and
the default No. is 255. The number is used for the remote and keyboard control.
•
CVBS Output Brightness: Adjust the video output brightness.
•
Operation Timeout: Set timeout time for menu inactivity. E.g.,when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after 5
minutes of menu inactivity.
•
Menu Output Mode: You can choose the menu display on different video output. There are auto,
HDMI, VGA and Main CVBS selectable.
4. Click the Apply button to save the settings.