Managing hdd group, Setting hdd groups, Ter managing hdd group – LT Security LTN8600 Series NVR (V2.3.2) User Manual
Page 174: 4 managing hdd group, 1 setting hdd groups
User Manual of 9600/8600/7700/7600 Series NVR
174
11.4 Managing HDD Group
11.4.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group, as shown in Figure 11. 13.
Figure 11. 13 Storage Mode Interface
3. Click the Apply button and the following Attention box will pop up.
Figure 11. 14 Attention for Reboot
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD> General
6. Select HDD from the list and click
icon to enter the Local HDD Settings interface, as shown in Figure