Calling presets, 2 calling presets – LT Security LTN8600 Series NVR (V2.3.2) User Manual
Page 55

User Manual of 9600/8600/7700/7600 Series NVR
55
4.2.2 Calling Presets
Purpose:
This feature enables the camera to point to a specified position such as a window when an event takes place.
Call preset in the PTZ setting interface:
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Check the round icon of Call Preset.
Figure 4. 4
PTZ- Call Preset
3. Choose the preset number.
Call preset in live view mode:
Steps:
1. Press the PTZ button on the front panel or click the PTZ Control icon
in the quick setting bar to enter
the PTZ setting menu in live view mode.
Figure 4. 5
PTZ Panel
2. Choose Camera in the list on the menu.
This manual is related to the following products: