Configuring hdd group for recording, 8 configuring hdd group for recording – LT Security LTN7616-HT (Hybrid) User Manual
Page 69
User Manual of Digital Video Recorder
68
5.8 Configuring HDD Group for Recording
Purpose:
You can group the HDDs and save the record files in certain HDD group.
Steps:
1.
Enter HDD setting interface.
Menu>HDD
Figure 5. 33 HDD General
2.
Select Advanced on the left bar.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
please refer to Chapter 10.3 Managing HDD Group.
3.
Select General in the left bar.
Click
to enter editing interface.
4.
Configuring HDD group.
1)
Choose a group number for the HDD group.
2)
Click
and then in the pop-up message box, click
to save your settings.
3)
Click
to back to the upper level menu.
Repeat the above steps3-4 to configure more HDD groups.
5.
Choose the Channels which you want to save the record files in the HDD group.
1)
Select Advanced on the left bar.
Figure 5. 34 HDD Advanced
2)
Choose Group number in the dropdown list of Record on HDD Group
3)
Check the channels you want to save in this group.
4)
Click
to save settings.
Note:
After having configured the HDD groups, you can configure the Recording settings
following the procedure provided in Chapter 5.2-5.7.