Managing hdd group, Setting hdd groups, 3 managing hdd group – LT Security LTN7616-HT (Hybrid) User Manual
Page 147: 1 setting hdd groups
User Manual of Digital Video Recorder
146
10.3 Managing HDD Group
10.3.1 Setting HDD Groups
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group, as shown below.
Note:
The device must be rebooted to activate the changes.
Figure 10. 10 Storage Mode Interface
3. Click
and the following Attention box will pop up.
Figure 10. 11 Attention for Reboot
4. Click
to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD > General
6. Select a HDD from the list and click
to enter the Local HDD Settings interface.