Condec UPC5110 - Manual (Page 41)

38 UPC5100/UPC5110 Operation & Maintenance Manual
7.0 Options - Replacement Kits
There are numerous replacement PN’s mentioned through out manual that can be ordered.
ORION-2D O-Ring Replacement Kit (Data Sheet # 65308):
• Nitrile Buna-N (standard) - PN 58499
• Ethylene-Propylene - PN 58506
• Silicone - PN 58509
• Neoprene - PN 58515
• Fluorocarbon “Viton” - PN 55277
Note: A small coating of Fluorinated Krytox grease, (PN 55593), should be applied to both sides of O-ring prior to
installation.
Pressure Trap (Data Sheet # 58621) - PN 58487
Note: For UPC5100/UPC5110 model’s prior to serial number A1300, approximate date prior to 7-9-1990 use Pressure
Trap, PN 58492, Data Sheet # 58627.
Battery Replacement Kit - PN 55354
Test Port (output) Attachment Swivel Fitting - PN 55291
Test Port (output) Quick-Disconnect Male Hose fitting - PN 60195
Fill Port (input) Quick-Disconnect Female Hose fitting - PN 57716
Test Port (output) Hose, with Quick-Disconnect Male fitting:
• 5' Long - PN 55281
• 10' Long - PN 55328
• 15' Long - PN 55336
• 20' Long - PN 55341
Fill Port (intput) Hose, with Quick-Disconnect Female fitting:
• 5' Long - PN 55282
• 10' Long - PN 55313
• 15' Long - PN 55319
• 20' Long - PN 55322